Modems

Zuletzt geändert 3rd Jan 2013
Category: Chemie- und Laborsoftware > WinWedge
Version: -
Article Ref.: 6A7E
»Zurück zur letzen Suche
»Print friendly version of this article.
1 person has found this article useful.
WinWedge 6A7E Can WinWedge be used for getting data from a remote site via a modem? Would I need to use TCP/IP wedge for this? Does it make a difference if it is an internal modem? Could you use WinWedge to activate the modem through dial up networking? You could use WinWedge to control a modem, either by associating particular modem command strings with command buttons in the Data Input window, or via the SEND, SENDCODE and SENDOUT DDE commands issued from another application (such as Excel). The data coming in through the modem could be funnelled to any application as usual. TCPWedge is essentially the same product as WinWedge, except that it accepts data from a TCP/IP connection rather than a serial port. Your would not need to use it, unless the modem was connected to a remote machine, in which case you would use TCP/COM to connect the remote machine's serial port with the network and TCPWedge to grab the data from the network. Dial-Up Networking is a service provided directly by Windows. As such, you could use it to control the modem, or you could use WinWedge, but not both at the same time. It does not matter whether the modem is internal or external. WinWedge - en

Wenn Sie technische Fragen zu Soft- und Hardware haben, die bei uns erworben wurde, dann verwenden Sie dazu bitte unsere Knowledge Base. Falls Sie keine Antwort in unserer Knowledge Base finden, dann fllen Sie bitte hier das Formular fr Technischen Support aus oder rufen uns an unter +49 69 9675 9610 (werktags von 9 bis 13 Uhr).

Zur Zeit ist es uns leider nicht möglich die folgenden Produkte anzubieten. Wir arbeiten jedoch daran Ihnen ein möglichst vielfältiges Produktsortiment zur Verfügung zu stellen. Bitte kontaktieren Sie uns wenn Sie Fragen oder Anregungen haben.